3. Align the front and rear output flanges with the 5. Connect the stator coil, trigger coil, and gear shift drive couplers; then secure with the screws and position switch connectors; then attach the engine tighten to 20 ft-lb. ground cable and starter cable and secure with cap screws and nuts. Tighten to 8 ft-lb. KC242 KC228A 3 KC243 4. Install the front and rear V-belt cooling boots and KC228B secure with the existing hardware. 6. Set the inlet air silencer into the frame; then install the exhaust pipe using a new exhaust pipe seal and grafoil seal. Tighten the cap screws evenly to 20 ft-lb and install the muffler retainer springs. KC235 KC237 KC236 3-45