KC258A KC257 5. Install the gas tank (see Gas Tank in this section). Throttle Cable Free-Play To adjust throttle cable free-play, see Section 2. Engine RPM (Idle) KC266 3. Install the carburetor onto the engine making sure To adjust the idle RPM, see Section 2. the alignment lug on the carburetor is between the two tabs on the air intake pipe; then tighten the clamp securely. Gas Tank ! WARNING Whenever any maintenance or inspection is made on the fuel system during which there may be fuel leakage, there should be no welding, smoking, open flames, etc., in the area. REMOVING 1. Turn the gas tank valve to the OFF position; then KC245A remove the seat and side panels. 2. Remove the cap screws (A) securing the rear of the front body to the frame; then remove two rein- stallable rivets (B) securing the gas tank cover to the body. KC256A 4. Connect the intake air housing and tighten all clamps and mounting hardware securely. 4-8