2. FRAME COVERS/EXHAUST MUFFLER MXU 500 IRS Instrument Connector Accessory Socket Disconnect the ignition switch, instrument C t and accessory socket connectors, then remove the meter cover. Installation is in the reverse order of removal. Ignition Switch Connector Drive Select Grip FUEL TANK COVER REMOVAL/INSTALLATION Remove the seat (page 2-4), front center cover (page 2-8), right/left footboards (page 2-7) and right/left side covers (page 2-8). Remove a bolt and then remove drive select grip. Remove the two fasteners from fuel tank cover left side. Fuel Tank Cap/Seal Remove the two fasteners from fuel tank cover right side. Remove the two fasteners from fuel tank cover front side. Remove the fuel tank cap by turning it counterclockwise and fuel tank seal, then remove the fuel tank cover. Put on the fuel tank cap after removing the cover to prevent duct, mud, etc. from entering the fuel tank Installation is in the reverse order of removal. 2-9