My Cart
| Description | Part number | Qty |
|---|
| Description | Part number | Qty |
|---|
5. FUEL INJECTION SYSTEM MXU 500EXi/MXU500i
REMOVAL Screw Hose quick band
Disconnect the connector and fuel band from
the fuel pump.
Remove the six screws onto the fuel pump.
Remove the fuel pump and O-ring.
Fuel Pump Connector
INSTALLATION
Replace a new O-ring on the fuel tank.
Don't damage the fuel pump wire and
ensure the connector rearward carefully.
Torque: 0.35 kgf-m (3.5 N-m, 2.5 lbf-ft)
FUEL OUTPUT PRESSURE
INSPECTIION
Turn the key to the OFF position.
Use the fuel hose clamp.
Disconnect the fuel hose from the fuel O-ring
injector.
Connect the fuel pressure gauge.
Turn the key to the ON position.
Check the fuel pressure.
Standard:3.0 Bar
If the fuel output pressure is less than 3.0
bar, may fail to start the engine or in
trouble in case of riding.
5-17
An excellent service and not too long too wait for the part to be delivered. I live in Germany and its not easy to get spare parts here. I hope not to need your services again but if I do I will have no hesitation in doing so. John W. Parmley
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much !
Great service from over seas
All parts came in together
👍🏽
fast delivery good service part fits exactly
4.7 / 5