6. COOLING SYSTEM MXU 550EXi/MXU500i WATER TEMPERATURE Water Temperature Sensor SENSOR Remove the right side body cover and right footboard (refer to the "FRAME COVERS" section in the chapter 2). Disconnect the water temperature sensor connector. Remove the water temperature sensor from the water joint. Water joint INSPECTION Connect the water temperature sensor to the ohmmeter. Attached the standard resistance list as bellow then check it. Temperature Standard resistance -20C/-4F 28.6K 40C/104F 1.46K 20C/68F 3.51 K10% 100°C/212°F 0.176 K After the water temperature sensor has been installed, fill coolant and perform air bleeding (refer to the "COOLANT REPLACEMENT" section in this chapter). INSTALLATION With thread lock applied to the threaded part, tighten the water temperature sensor. Torque: 0.8 kgf-m (8 N-m, 5.8 lbf-ft) 6-17