18. LIGHTS/SWITCHES MXU 500EXi/MXU500i BULBS REMOVAL Headlight Connector HEADLIGHT Disconnect the headlight wire connector. Remove the rubber boot from the headlight case. Rubber Boot Lock Clip Relax the lock clip to remove the bulb and replace with a new one. Install the bulb, aligning the bulb socket groove with the bulb tab and set the lock clip. Connect headlight wire connector. Install the rubber boot. Install the front fender in the reverse order of removal. Bulb POSITION LIGHT Remove three screws then to separate this position light(one unit of LED type) . Install position light in the reverse order of removal Position light 18-2