17. IGNITION SYSTEM PEOPLE/PEOPLE S 250 A .C. GENERATOR INSPECTION EXCITER COIL/PULSER COIL INSPECTION This test is performed with the stator installed in the engine. Remove the seat and met-in box. ( 2-6) Disconnect the A.C. generator connector. Measure the exciter coil resistance between the black/white wire terminal and ground. Black/whiteGround 8.1M Measure the resistance in the X range. Electric tester: YF-3501 For A.C. generator removal/installation, refer to pages 10-3 and 10-6. Disconnect the pulser coil wire coupler. Measure the pulser coil resistance between the blue/white and green/white wire terminals. Blue/YellowGreen/White 105110 Pulser Coil Wire Coupler Electric tester: YF-3501 IGNITION UNIT Ignition Unit RESISTANCE INSPECTION Measure the resistance between the terminals. Replace the ignition unit if the readings are not within the specifications in the table below. 17-4