Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
1. GENERAL INFORMATION PEOPLE/PEOPLE S 250
After clamping, check each wire to make Route harnesses so they are neither
sure it is secure. pulled tight nor have excessive slack.
Do not pull
too tight
Do not squeeze wires against the weld or
its clamp. Protect wires and harnesses with electrical
tape or tube if they contact a sharp edge or
corner.
After clamping, check each harness to
make sure that it is not interfering with any
moving or sliding parts.
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
When fixing the wire harnesses, do not
make it contact the parts which will
generate high heat.
Do not break the sheath of wire.
No Contact If a wire or harness is with a broken sheath,
repair by wrapping it with protective tape or
replace it.
Route wire harnesses to avoid sharp edges
or corners. Avoid the projected ends of
bolts and screws.
Route wire harnesses passing through the
side of bolts and screws. Avoid the When installing other parts, do not press or
projected ends of bolts and screws. squeeze the wires.
Do not press or
squeeze the wire
1-6