10. A.C. GENERATOR/STARTER CLUTCH People GT 300i Starter Idle Gear Shaft Install the starter idle gear and shaft. Install the starter driven gear onto the crankshaft. Key Starter Driven Gear FLYWHEEL INSTALLATION Flywheel Install the flywheel onto the crankshaft by aligning the key on the crankshaft with the groove in the flywheel. · Before installation, check and make sure that the inside of the flywheel is not contaminated. Install washer and nut. Nut Flywheel Hold the flywheel with the flywheel holder and tighten the flywheel nut. Torque: 5.5~6.5 kgf-m (58.8 N-m) Remove the flywheel nut and washer. Special Flywheel holder E021 Flywheel Holder 10-8