people gt 300 i Workshop-manual : Page 152

          13. FUEL INJECTION SYSTEM                                            People GT 300i




 TPS INSPECTION
 Support the scooter on a level surface.
 Put the side stand up and engine stop switch
 is at "RUN".
 Turn the ignition switch to "ON".
 Measure if the ECU voltage outputs to TPS
 between the following terminals of the TPS
 connector.

            Terminal                 Normal
 Violet/Red (+) ­ Green/Pink (-)      5V

 Throttle position sensor (TPS) resistance
 (at 20°C/68°F)        3500~6500

                                                                           TPS




                                                   Cable Ends
 REMOVAL
 Loosen the throttle cables with the adjusting
 nuts.
 Disconnect the throttle cable ends from
 throttle seat.




                                                 Adjusting Nuts


                                                        ISC Sensor   MAP Sensor

 Disconnect the TPS, ISC and MAP sensor
 connectors.
 Loosen the air cleaner connecting hose band
 screw.
 Loosen the intake manifold band screw.
 Remove the throttle body, MAP sensor, TPS
 sensor and ISC sensor as a set.


                                                           TPS Sensor

                                                                           13-24