18. STARTING SYSTEM People GT 300i Starter Motor Cable INSTALLATION Connect the starter motor cable. Check the O-ring for wear or damage and replace if necessary. Apply grease to the O-ring and install it to the starter motor. Tighten the two mounting bolts. O-ring Yellow/Red Wire And Green/Yellow Wire STARTER RELAY INSPECTION Disconnect the starter relay wire connector. Check for continuity between the yellow/red wire and green/yellow wire. There should be continuity when the starter button is depressed. If there is no continuity, check the starter button for continuity and inspect the wire. OPERATION TEST Connect the electric meter to the starter relay terminals that connect to the battery positive cable and the starter motor cable. Connect a fully charged battery across the starter relay yellow/red and green/yellow wire terminals. Check for continuity between the starter relay Starter Relay test chart large terminals. The relay is normal if there is continuity and hear sounds. 18-4