5. ENGINE REMOVAL/INSTALLATION People GT 300i SERVICE INFORMATION GENERAL INSTRUCTIONS · A floor jack or other adjustable support is required to support and maneuver the engine. Be careful not to damage the scooter body, cables and wires during engine removal. · Use shop towels to protect the scooter body during engine removal. · Drain the coolant before removing the engine. · After the engine is installed, fill the cooling system with coolant and be sure to bleed air from the water jacket. Start the engine to check for coolant leaks. · Before removing the engine, the rear brake caliper must be removed first. Be careful not to bend or twist the brake fluid tube. SPECIFICATIONS Engine oil capacity: At disassembly: 1.5 L At change: 1.3 L Coolant capacity: Radiator: 766 cc Hose with cool coolant: 169 cc Hose with hot coolant: 194 cc Reserve tank: 590 cc Total capacity: 1719 cc TORQUE VALUES 90304-GHE8-0040 Engine hanger (Engine side) 5.0 kgf-m (50 N-m) 90305-LBD4-9000 Engine hanger (Frame side) 6.5 kgf-m (65 N-m) 95801-10060 Rear fork mount bolts 3.5 kgf-m (35 N-m) 90305-KFW6-9120-M1 Rear axle nut 12.0 kgf-m (120 N-m) 95801-10035-00 Rear cushion lower/upper mount bolts 4.0 kgf-m (40 N-m) 5-1