6. CYLINDER HEAD/VALVES People GT 300i Tighten the four cylinder head nuts and the Nuts four bolts between the cylinder head and cylinder. Torque: Cylinder head nuts: 3.6 kgf-m (35.3 N-m) Turn the A.C. generator flywheel so that the Camshaft Gear Round hole "T" mark on the flywheel aligns with the index mark on the right crankcase cover. Keep the round hole on the camshaft gear facing up and align two bolts on the camshaft gear with the cylinder head surface (Position the intake and exhaust cam lobes down.) and install the cam chain over the camshaft gear. · Apply engine oil to the threads of the cylinder head cap nuts. · Diagonally tighten the cylinder head Bolts cap nuts in 23 times. · First tighten the cylinder head cap nuts and then tighten the bolts between the cylinder and cylinder head to avoid cracks. Install the thermostat bolt. Torque: 1.2 kgf-m (11.8 N-m) Turn the cam chain tension screw counter- clockwise to release it. 6-11