5. ENGINE REMOVAL/INSTALLATION SUPER 9 50 Clamp ENGINE REMOVAL Remove the frame body cover. ( 2-2) Remove the brake fluid tube bolt of the rear brake caliper. Remove the rear brake caliper bolt and the rear brake caliper. Rear Brake Caliper Bolt Auto Fuel Valve Oil Inlet Line Disconnect the oil pump control cable from the pump body. Disconnect the oil inlet line from the oil pump. After the oil inlet line is disconnected, plug the oil line opening to prevent oil from flowing out. Disconnect the auto bystarter, A.C. generator, thermosensor wire couplers and starter motor wire connectors. Disconnect the fuel tube and vacuum tube that go to the carburetor from the auto fuel valve. Oil Pump Control Cable AC Generator Wire Connector Remove the spark plug cap. Water Hose Drain the coolant. ( 3-10) Disconnect the water hose. Spark Plug Cap 5-2