agility 50 2 Workshop-manual : Page 175

          17. LIGHTS/INSTRUMENTS/SWITCHES                                      FILLY LX 50
                                                  Fuel Unit
 FUEL UNIT
 No Smoking!
 REMOVAL
 Remove the met-in box. ( 2-3)
 Remove the frame right side cover. ( 2-4)
 Disconnect the fuel unit wire connector.
 Turn the fuel unit retainer counterclockwise
 to remove it.
 Do not damage the fuel unit wire.
                                                         Tab               Groove

 Remove the fuel unit.
 Be careful not to bend or damage the
    fuel unit float arm.
 INSTALLATION
 The installation sequence is the reverse of
 removal.
 · Align the groove on the fuel unit with
      the tab on the fuel tank.
    · Align the arrow on the retainer with the
      arrow on the fuel tank.
    · Turn the retainer clockwise to secure it.                Fuel Unit
                                                                                    L/W
 INSPECTION
 Remove the fuel unit.
 Measure the resistance between the fuel unit
 wire terminals with the float at upper and
 lower positions.
  Wire Terminals      Upper         Lower
     GY/W                  30        686
     GL/W                  566       153
    Y/WL/W                 599       599

 FUEL GAUGE INSPECTION                                         Y/W             G
 Connect the fuel unit wire connector and turn
 the ignition switch "ON".
 Before performing the following test,
   operate the turn signals to determine
   that the battery circuit is normal.
 Check the fuel gauge needle for correct
 indication by moving the fuel unit float up
 and down.
     Float Position      Needle Position
         Upper              "F" (Full)
         Lower             "E" (Empty)

17-1