Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
4. FUEL SYSTEM Pulsar CK 125
SLOW/MAIN JET INSTALLATION Throttle Stop Screw Slow Jet
Install the slow jet.
Install the needle jet and main jet.
Install the throttle stop screw and air screw.
· When installing the air screw, return it
to the original position as noted during
removal
· After the carburetor is installed, be
sure to perform the Exhaust Emission
Air Screw Main Jet
Float
Install the float valve, float and float pin.
Float Pin
FLOAT LEVEL INSPECTION
Turn the carburetor upside down so that the
float will go down to make the float valve
contact the float valve seat.
Then slowly tilt the carburetor and measure
the float level with the float level gauge
while the float pin just contacts with float
valve.
Float Level: 12.5mm Float Level Gauge
When adjusting, carefully bend the float pin.
Check the float for proper operation and then
install the float chamber.
4-6