1. GENERAL INFORMATION DOWNTOWN 125i
Route harnesses so they are neither pulled
tight nor have excessive slack. Do not pull
too tight!
Protect wires and harnesses with electrical
tape or tube if they contact a sharp edge or
corner.
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
Do not break the sheath of wire.
If a wire or harness is with a broken sheath,
repair by wrapping it with protective tape
or replace it.
Do not press or
squeeze the wire.
When installing other parts, do not press
or squeeze the wires.
-8-