Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
4. LUBRICATION SYSTEM Downtown 300i ABS
Remove two oil pump mounting bolts and the
oil pump.
Arrow Mark
OIL PUMP INSTALLATION
Install the oil pump into the crankcase.
Install the oil pump with the arrow on the
pump body facing up and fill the oil pump
with engine oil before installation.
Pump Shaft
After the oil pump is installed, tighten the two
mounting bolts.
Install the pump driven gear and drive chain
by aligning the pump driven gear with the
cutout in the pump shaft.
Install and tighten the pump driven gear bolts.
Install the oil separator cover and tighten the
bolts.
Oil Separator Cover
Install the starter idle gear and starter clutch.
Starter Idle Gear
Install the gasket and dowel pins.
Install the right crankcase cover and tighten
the twelve bolts.
Torque: 1.2 kg-m
Diagonally tighten the bolts in 2 3
times.
Dowel Pin
4-6