kxr maxxer 250 300 Workshop-manual : Page 198

          15. REAR WHEEL/AXLE/SUSPENSION                                                       ATV 300/250


 SERVICE INFORMATION
 GENERAL INSTRUCTIONS
 · Jack the machine front wheel off the ground and be careful to prevent the machine from falling
   down.
 · During servicing, keep oil or grease off the brake disk
 · Inspect the brake system before riding.

 SPECIFICATIONS                                                                       mm (in)
                      Item                              Standard            Service Limit
                                        Radial                                2 (0.08)
   Rear wheel        Rim run out
                                        Axial                                 2 (0.08)

 TORQUE VALUES
 Rear wheel nut                                  4.5 kgf-m (45 N-m, 32 lbf-ft)
 Rear shock absorber upper mount bolt            4 kgf-m (40 N-m, 29 lbf-ft)
 Rear shock absorber lower mount bolt            4 kgf-m (40 N-m, 29 lbf-ft)
 Rear swingarm pivot bolt                        7 kgf-m (70 N-m, 52 lbf-ft)
 Rear wheel hub nut                              10 kgf-m (100 N-m, 72 lbf-ft)
 Rear wheel shaft nut                            12 kgf-m (120 N-m, 86 lbf-ft)
 Rear hub nut                                    4 kgf-m (40 N-m, 29 lbf-ft)
 Caliper holder bolt                             1 kgf-m (10 N-m, 7.2 lbg-ft)


 SPECIAL TOOLS
 Nut wrench  F010


 TROUBLESHOOTING
 Rear wheel wobbling
 · Bent rim
 · Faulty tire
 · Axle not tightened properly

 Soft rear shock absorber
 · Weak shock absorber spring
 · Faulty damper




                                                                                            15-2