12. FUEL SYSTEM LIKE 200i TPS (Throttle Position Sensor) Connect with the Fi diagnostic tool. LGS6 Choose the Data Analyze Check if the TPS position data is malfunction. (Key switch ON but engine is not started) If data was incorrect when the idle and throttle fully opened, TPS is possible to be problem. Standard: Item Specification TPS volt Idle (0°)=0.230.05V Throttle fully(>90°) = over 3.27V Connector ENGINE TEMPERATURE SENSOR REMOVAL Remove the throttle body Dismantle the intake manifold Disconnect the connector of engine temperature sensor Remove the engine temperature sensor Engine Temperature Sensor INSPECTION The ignition is turned off Disconnect the connector between engine temperature sensor and harness wires The ignition is turned on Measure the input voltage from ECU to engine temperature sensor, voltmeter probe to G L wire and voltmeter probe to VG wire Standard: 50.25V 12-18