like 200 i Workshop-manual : Page 41

          4. LUBRICATION SYSTEM                                                        LIKE 200i


    ENGINE OIL
    OIL LEVEL
    
       · Place the motorcycle upright on level
        ground for engine oil level check.
      · Run the engine for 23 minutes and
        check the oil level after the engine is
        stopped for 23 minutes.

                                                       Oil Dipstick
    Remove the oil dipstick and check the oil
    level with the oil dipstick.
    If the level is near the lower level, fill to
    the upper level with the specified engine
    oil.

    OIL CHANGE
     The engine oil will drain more easily
         while the engine is warm.

    Remove the oil filter screen cap located              Oil Filter Screen Cap
    on the bottom of the engine to drain the
    engine oil thoroughly.

     After the oil has been completely
     drained,check the filter screen O-ring for
     damage and replace if necessary.
    Install the oil filter screen, spring and filter
    screen cap.
    Torque: 1.5kg-m
    Fill with the specified SAE10W40#, API:
    SG/CD engine oil to the proper level.
    Oil Capacity: At disassembly : 1.1 liter
                     At change        : 0.9 liter

    Check for oil leaks and then start the
    engine and let it idle for few minutes.
    Recheck the oil level.




3