16. BATTERY/CHARGING SYSTEM/ A.C. GENERATOR MXU 300/250 5. Release the rings and remove the rubber band (6). 6. Shift the battery (7) and the terminal leads face you. 7. Disconnect the negative (-) terminal lead (8) from the battery first, then disconnect the positive (+) terminal lead (9). 8. Remove the battery. When disconnecting the battery positive (+) cable, do not touch the frame with tool; otherwise it will cause short circuit and sparks to fire the fuel. INSTALLATION 1. Installation is in the reverse order of removal. First connect the positive (+) cable and then negative (-) cable to avoid short circuit. 2. Make sure the battery is installed upright as shown 3. Check all bolts and other fasteners are secure. 4. After installing the battery, check to see if the battery cables are routed correctly. 16-5