1. GENERAL INFORMATION SUPER8 125
SPECIFICATIONS
Motorcycle Name & Type SUPER8 125 Air cleaner type & No Paper element, wet
Name & Model No. LEJ3 Fuel capacity 6.0 liter
Fuel System
Overall length (mm) 1940 Type CVK
Carburetor
Overall width (mm) 745 Piston dia. (mm) 22
Overall height (mm) 1220 Venturi dia.(mm) 26equivalent
Wheel base (mm) 1365 Throttle type Butterfly type
Engine type O.H.C. Type CDI
Electrical Equipment
Ignition System
Displacement 125cc Ignition timing BTDC27°2°/4000rpm
Fuel Used 92# nonleaded gasoline Contact breaker Non-contact point type
Front wheel 43
Net weight (kg) Rear wheel 55 Spark plug NGK CR7HSA
Total 108
Front wheel 45 Spark plug gap 0.60.7mm
Gross weight(kg) Rear wheel 67 Battery Capacity 12V7AH
Total 144
Power Drive System Clutch Type Dry multi-disc clutch
sion Gear Gear
Transmis- Reduction
Front wheel 100/80 -14 56J Type Non-stage transmission
Tires
Rear wheel 120/80 -14 56J Automatic centrifugal
Operation
Ground clearance (mm) 112 type
7 (Initial speed Type Two-stage reduction
Perform- Braking distance (m) 30km/h)
ance Min. turning radius (m) 1.99 Reduction 1st 1.0-2.8
Starting motor & ratio 2nd 46/16*46/15
Starting system kick starter
Front Caster angle 27°
Type Gasoline, 4-stroke
Moving Device
Cylinder arrangement Single cylinder
Axle Trail length
Combustion chamber type Semi-sphere Tire pressure Front 1.75
(kg/cm) Rear 2.25
Valve arrangement O.H.C.
Bore x stroke (mm) 52.4 x 57.8 Turning Left 45°
Compression ratio 9.60.2 angle Right 45°
Compression pressure Brake system Front DISK (180mm) brake
(kg/cm-rpm) 132
type Rear Drum (110mm) brake
Max. output 6.9/7500kw/(r/min)
Front TELESCOPE
Engine
Max. torque 9.1/6500N.m/rpm
Device
Damping
Suspension type
Open -2.5° Rear Unit Swing
Intake
Port Close 32° Shock absorber Front 80
timing Open -3° distance 82
Rear
Exhaust
Close 33° Frame type Under Bone
Valve clearance Intake 0.12
(cold) (mm) Exhaust 0.12
Idle speed (rpm) 1700100rpm
Lubrication type Forced pressure &
System
Lubrication
wet sump
Oil pump type Inner/outer rotor type
Oil filter type Full-flow filtration
Oil capacity 0.9 liter
Cooling Type Forced air cooling
1-2