super 8 125 Workshop-manual : Page 39

          3. INSPECTION/ADJUSTMENT                                                    SUPER8 50

                                                                                  Screws
 AIR CLEANER
 AIR CLEANER REPLACEMENT
 Remove the air cleaner case cover screws and
 the cover by removing the six screws.

 Remove the air cleaner element by removing
 the four screws.
 Check the element and replace it if it is
 excessively dirty or damaged.

                                                               Air Cleaner Case Cover
                                                Air Cleaner Element

 CHANGE INTERVAL
 More frequent replacement is required when
 riding in unusually dusty or rainy areas.
 · The air cleaner element has a viscous
      type paper element. Do not clean it
      with any fluid.
    · Be sure to install the air cleaner
      element and cover securely.




 SPARK PLUG
 Remove the spark plug.
 Check the spark plug for wear and fouling
 deposits.
 Clean any fouling deposits with a spark plug
 cleaner or a wire brush.
 Specified Spark Plug:
    CHAMPION-P-RZ9HC
     NGK CR7HSA


                                                Gap, Wear, and
                                                Fouling Deposits

 Measure the spark plug gap.
 Spark Plug Gap: 0.60.7mm                                                   Washer
 When installing, first screw in the spark                                  Deformation

    plug by hand and then tighten it with a
    spark plug wrench.                               Cracks
                                                     Damage




                                                                                           3-4