1. GENERAL INFORMATION SUPER 9 50
SPECIFICATIONS
Name & Model No. SH10DA Air cleaner type & No Sponge wet
Fuel System
Overall length 1850mm Gear oil capacity 0.12 liters
Overall width 700mm Fuel capacity 6.8 liters
Carburetor
Overall height 1190mm Type
Wheel base 1295mm Piston dia. 13
Engine type Water cooled 2-stroke Venturi dia. 14 equivalent
Displacement 49.4cc
Fuel Used 92# nonleaded gasoline Type CDI
Electrical Equipment
Ignition System
Front wheel 41 Ignition timing 13.5°2°/2000rpm
Net weight (kg) Rear wheel 61
Total 102
Front wheel 95 Spark plug NGK
Gross weight(kg) Rear wheel 138 BR8HSA
Total 233
Front wheel 120/70-12 Spark plug gap 0.60.7mm
Tires Battery Capacity 12V4AH
Rear wheel 130/70-12
Ground clearance 160mm Clutch Type Dry multi-disc clutch
Power Drive System
sion Gear Gear
Transmis- Reduction
Perform- Braking distance (m) 4.4m /30km/HV Type Non-stage transmission
ance Min. turning radius 2150mm Automatic centrifugal
Operation
Starting motor & type
Starting system kick starter
Type Gasoline,2-stroke Type Two-stage reduction
Cylinder arrangement Single cylinder Reduction 1st
Combustion chamber type Semi-sphere ratio 2nd
Bore x stroke (mm) 39 x 41.4 Front Caster angle
Moving Device
Compression ratio 7.2:1 Axle Connecting rod
Compression pressure
(kg/cm-rpm) 11.8 Tire pressure Front 1.75
Max. output (ps/rpm) 3.6/6500 (kg/cm) Rear 2.25
Engine
Max. torque (N-m/rpm) 3.92/6000 Turning Left 42.5°
Intake Open Automatic controlled angle Right 42.5°
Port (1mm) Close Automatic controlled Brake system Front Disk brake
timing Exhaust Open type Rear Disk brake
(1mm) Close Suspension Front Telescope
Device
Damping
Valve Intake type Rear Unit swing
clearance (cold) Exhaust
Shock absorber Front Telescope
Idle speed (rpm) 2000100rpm type Rear Double swing
Lubrication type Separate type
System
Lubrication
Frame type Under bone
Oil pump type Plunger type
Oil filter type Full-flow filtration
Oil capacity 1.7 liters
Exchanging capacity 1.4 liters
Cooling Type Water cooling
1-2