11. FRONT WHEEL/SUSPENSION/ STEERING ZING II 125 Remove the two handlebar lock nuts to remove the handlebar. INSTALLATION Install the handlebar in the reverse order of removal. Torque: 0.81.2 kg-m Nuts Hole When installing the right and left handlebar switch housings, align the pin on the housing with the hole in the handlebar. Tighten the two switch housing screws. Clutch Lever Holder Pin UP Mark Hole When installing the master cylinder and clutch lever holders, align the tab on the holder with the hole in the handlebar with the holder "UP" mark facing up. First tighten the upper bolt and then the lower bolt. Torque: 1.01.4 kg-m 11-5