zing 125 qe Workshop-manual : Page 109

          11. FRONT WHEEL/SUSPENSION/
    STEERING                                                                      ZING II 125

                                                             Upper Fork Bridge Bolts
 FRONT FORK
 REMOVAL
 Remove the front wheel. (Refer to 11-7.)
 Remove the six front fender bolts and the
 front fender.
 Remove the front brake caliper.
 Loosen the upper and lower fork bridge
 bolts.
 Remove the right and left front forks.

                                                 Lower Fork Bridge Bolt




 DISASSEMBLY
 Place shop towels under the front fork tube.
 Use a vise to hold the front fork tube and
 remove the bolt.
 When removing the front fork bolt, be
   careful that the spring in the tube may
   spring out.
 Remove the front fork spring from the front
 fork tube and compress the spring several
 times to squeeze out the engine oil.
                                                                          Front Fork Bolt




 Use a vise to hold the front fork bottom tube
 and place shop towels under the bottom tube.
 Remove the socket head bolt.
 · When      using the vise, do not tighten
     the front fork bottom tube excessively.
   · If it is difficult to remove the socket
     head bolt, temporarily install the front
     fork spring and front fork bolt.
 Remove the front fork piston and return               6mm Socket Spanner
 spring. Remove the front fork bottom tube
 and the oil stopper.

11-11