8. STARTER MOTOR/GENERATOR/LEFT CRANK- CASE COVER/STARTER CLUTCH ZING II 125 STARTER MOTOR REMOVAL Remove the starter motor mounting two bolts and the motor. Inspect the starter motor O-ring for damage or deterioration. Inspect the starter motor pinion for wear or damage. Mounting Bolts Cover O-ring Reduction Gear Remove the three bolts attaching the starter motor reduction gear cover. Remove the reduction gear cover. Remove the reduction gear, shaft and washers. Inspect the reduction gear for wear or damage. Inspect the reduction gear cover O-ring for damage or deterioration. Washers Shaft Bolts LEFT CRANKCASE COVER/ AC GENERATOR REMOVAL Disconnect the neutral light switch wire. Remove the left crankcase cover eight bolts. Remove the left crankcase cover and two dowel pins. Clean off all gasket material from the left crankcase cover. Remove the reduction pinion. Neutral Light Wire Hold the flywheel with a flywheel holder. Flywheel Puller Remove the flywheel lock bolt. Remove the flywheel using a flywheel puller. Special Tool Flywheel holder E021 Flywheel puller E005 Flywheel Holder Flywheel 8-3