agility 50 rs naked 2t Workshop-manual : Page 37

          2. FRAME COVERS/EXHAUST MUFFLER                                         AGILITY RS 50 NAKED

 To disconnect the seat lock wire.
 Remove the two screws on the frame body
                                                   Seat Lock Wire                Frame Body Cover
 cover and frame body cover.
 The installation sequence is the reverse of
 remove
 Remove the three bolts attaching each of the
 right and left side covers.
 Remove the right and left side covers.
 During     removal, do not pull the joint
   claws forcedly to avoid damage.
   When installing, be sure to connect the
   seat lock wire.
                                                                                 Screws
                                                 Floor Board.            Bolts




 FLOOR BOARD REMOVAL
 Remove the rear carrier and rear seat. ( 2-3)
 Remove the met-in box. ( 2-3)
 Remove the frame body cover. ( 2-4)
 Remove the four bolts and six screws
 attaching the floor board.
 Remove the floor board.

                                                    Screws

                                                                    Bottom Protector Cover

 BOTTOM PROTECTOR COVER
 REMOVAL
 Remove the four bolts on the bottom
 protector cover.
 Remove the bottom protector cover.




                                                                Bolts




                                                                                             2-4