1. GENERAL INFORMATION K-PIPE 125
Route harnesses so they are neither Do not pull
pulled tight nor have excessive slack. too tight!
Protect wires and harnesses with electrical
tape or tube if they contact a sharp edge or
corner.
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
Do not break the sheath of wire.
If a wire or harness is with a broken sheath,
repair by wrapping it with protective tape
or replace it.
Do not press
or squeeze the
wire.
When installing other parts, do not press or
squeeze the wires.
1-7