kxr maxxer 250 300 Workshop-manual : Page 75

          5. FUEL SYSTEM                                                                      ATV 300/250

                                                  Throttle Valve                   Needle Retainer
 Pry off the needle retainer and remove the jet
 needle.
 Check the throttle valve and jet needle for
 wear or damage.


 ASSEMBLY
 Reverse the "DISASSEMBLY" procedures.


                                                        Jet Needle                   Clip

                                                                                  Groove
 Install the throttle valve into the carburetor
 body.
 Align the groove in the throttle valve
   with the throttle stop screw on the
   carburetor body.




                                                     Throttle Stop Screw
 CARBURETOR
 REMOVAL
 Remove the fuel tank and carburetor cap.
 (Refer to "FUEL TANK" and "THROTTLE
 VALVE DISASSEMBLY" section in the
 chapter 5)
 Loosen the drain screw to drain the gasoline
 from the float chamber.
 · Keep sparks and flames away from the
     work area.
   · Drain gasoline into a clean container.                     Fuel Drain Plug



 Loosen the screw on the lock plate for                                                Screw
 disconnect the choke cable.




                                                  Choke Cable

                                                                                               5-8