movie 125 euro 3 Workshop-manual : Page 181

          17. LIGHTS/INSTRUMENTS/SWITCHES                                              MOVIE SYSTEM


 HEADLIGHT
 BULB REPLACEMENT
 Remove the front cover.
 Remove the rubber boot from the bulb
 socket.
 Remove the bulb socket by turning it
 counter-clockwise.
 Remove the bulb for replacement.
 Install a new bulb, aligning the groove on
 the bulb socket with the tab on the bulb.
 Install the bulb socket.
 Install the rubber boot.                            Rubber Boot               Bulb Socket
 Install the front cover.


 HEADLIGHT REMOVAL
 Remove the front cover.
 Remove the six screws attaching the
 headlight.
 Remove the headlight.
 The installation sequence is the reverse of
 removal.
 After installation, adjust the headlight beam.

                                                                     Screws

 FRONT TURN SIGNAL LIGHT
 Remove the front cover.
 Remove the front turn signal bulb socket
 and replace the bulb.
 The installation sequence is the reverse of
 removal.




                                                  Turn Signal Bulb Sockets

                                                               Position Light Shell
 POSITION LIGHT/REAR TURN
 SIGNAL LIGHT
 BULB REPLACEMENT
 Remove the rear cover.
 Remove the two screws to remove the
 position light/rear turn signal light shell.
 Remove the bulb sockets and replace the
 bulb.
 The installation sequence is the reverse of
 removal.
                                                                     Screws

17-3