10.FINAL REDUCTION/ TRANSMISSION SYSTEM MXU 300/250 " LCD9L" Mark Lower Gearshift Fork Apply engine oil to the gearshift fork, sliding surfaces and gearshift fork pawl. Install the lower gearshift fork into the clutch dog (counter axle) groove with its "LCD9L" mark facing down. Install the shift cam into the transmission case, then install the lower gearshift fork pawl into the shift cam groove. Shift Cam Guide Bar "LCD9R" Mark Apply engine oil to the gearshift fork, sliding surfaces and gearshift fork pawl. Install the upper gearshift fork into the clutch dog (main axle) groove and install the upper gearshift fork pawl into the shift cam groove with its "LCD9R" mark facing down. Install the guide bar. Install the shift cam stopper/spring/washer/plug and tighten plug to specified torque. Upper Gearshift Fork Plug/Washer/Spring/ Shift Cam Stopper Torque: 48 N-m (4.8 kgf-m, 35 lbf-ft) Shift Shaft Install the shift shaft. Make sure that the lever on the gear change switch correctly engages with the locating slot on the shift shaft. Align the mark on the shift shaft gear with the mark on the shift cam gear. 10-38