15. REAR WHEEL/AXLE/SUSPENSION DRIVING MECHANISM MXU 300/250 Apply Grease Apply molybdenum disulfide grease to the center splines of the rear axle. Install the rear axle into the final gear case from left side until it is fully seated. Install the rear axle into the axle housing from swingarm right side and install final gear case. Install and tighten the mounting bolts in several steps to the specified torque. Torque: 55 N-m (5.5 kgf-m, 40 lbf-ft) Bolts Bolts Apply Grease Spring Apply molybdenum disulfide grease to the universal joint splines and the drive shaft splines. Apply molybdenum disulfide grease to the drive shaft splines. Install the spring into the drive shaft Apply Grease 15-41