14. FRONT WHEEL/FRONT SUSPENSION/ STEERING SYSTEM MXU 500IRS INSTALLATION Nut/Washer Install the wheel hub, washer and nut. Apply grease onto the wheel hub splines. Apply the front brake and then tighten the nut to the specified torque. Torque: 7 kgf-m (70 N-m, 50 lbf-ft) Install the cotter pin and band ends of cotter pin. Cotter Pin Do not apply oil to the seat of the nut. Do not loosen the wheel hub nut after torque tightening. If the wheel hub nut groove is not aligned with the cotter pin hole, align groove with the hole by tightening up on the wheel hub nut. Always use a new cotter pin. 14-6