people 250 s 1 Workshop-manual : Page 176

          13. FUEL SYSTEM/CARBURETOR/
    FUEL PUMP/ FUEL TANK                                                PEOPLE/PEOPLE S 250



 Check the heater with battery.
 If the heater is getting hot, means the heater
 without problem, otherwise the heater has to
 be changed.




                                                                    Heater


                                                   Air Cleaner Connecting
                                                   Tube Band              Intake Manifold Band
 CARBURETOR INSTALLATION
 Tighten the drain screw.
 Install the carburetor onto the intake manifold
 and tighten the band.
 Install the air cleaner connecting tube and
 tighten the band.
 Connect the throttle cable to the carburetor.
 Connect the heater carburetion wire coupler.
 After connecting the throttle cable, adjust
    the throttle grip free play to 26mm.           Throttle Cable            Heater Carburetion
                                                                             Wire Coupler




                                                       T.P.S          Auto Bystarter   Fuel Tube
 Connect the auto bystarter wire.
 Connect the fuel tube and vacuum tube to the
 carburetor.
 Connect the throttle position sensor wire.
 Perform the following inspections and
 adjustments:
 ·Throttle grip free play ( 3-3)
 ·Idle speed ( 3-6)
 Install the seat, met-in box and frame body
 cover.
                                                        T.P.S Wire           Auto Bystarter Wire




13-17