13. FUEL SYSTEM/CARBURETOR/ FUEL PUMP/ FUEL TANK PEOPLE/PEOPLE S 250 Outlet Tube Vacuum Tube FUEL PUMP INSTALLATION Install the fuel pump and secure it with the two nuts. Connect the fuel pump inlet, outlet and vacuum tubes. Install the met-in box and carrier. Install the body cover, center cover and rear fender A. Nuts Inlet Tube Outlet Tube Measure the fuel pump output. Start the engine and disconnect the fuel outlet tube and place a clean container under the tube to check the fuel output. Output: 33cc/1800rpm/10 seconds . Fuel Pump Container Tank Shield FUEL TANK REMOVAL Remove the floor board. ( 2-7) Remove four nuts at the tank shield and remove the tank shield. Nuts 13-20