Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
5. ENGINE REMOVAL/INSTALLATION People GT 125i
Remove the engine mount nut
Pull out the engine mount bolt.
Remove the engine from the frame.
At removing the engine, be careful not to
catch your hand or finger between the
engine hanger and crankcase.
INSTALLATION
Installation is in the reverse order of removal.
Tighten the engine mounting bolt/nut to the
specified torque.
Torque: 5 kgf-m (50 N-m)
Tighten the right and left rear shock absorber
lower mount bolts to the specified torque.
Torque: 4.0kgf-m (40N-m)
Install the rear brake caliper and tighten the
mount bolts to the specified torque.
Torque: 3.2 kgf-m (32 N-m, 23 lbf-ft)
After installation, inspect and adjust the
following:
· Throttle grip free play
· Fill the cooling system with coolant and
start the engine to bleed air from the system.
API/ABV Reset(Refer to chapter14)
5-5