13. STEERINGHANDLEBAR/FRONTWHEEL/FRONT BRAKE/FRONTSHOCKABSORBER/FRONTFORK SUPER 9 50 FRONT BRAKE Holder Bolts BRAKE MASTER CYLINDER REMOVAL Remove the handlebar covers. ( 2-7) First drain the brake fluid from the hydraulic brake system. Disconnect the front stop switch wire connector. Remove the brake fluid tube bolt. Remove the two bolts attaching the brake master cylinder Remove the brake master cylinder. · When servicing the brake system, use shop towels to cover rubber and plastic Stop Switch Wire Connector parts and coated surfaces to avoid being contaminated by brake fluid. · When removing the brake fluid tube Snap Ring Rubber Cover bolt, be sure to plug the tube end to avoid brake fluid leakage. DISASSEMBLY Remove the brake lever bolt and the brake lever. Remove the piston rubber cover and snap ring from the brake master cylinder. Snap Ring Pliers (Close) Remove the washer, main piston and spring Master Cylinder Spring Main Piston from the brake master cylinder. Clean the inside of the master cylinder and brake reservoir with brake fluid. Snap Ring Rubber Cover 13-8