1. GENERAL INFORMATION Movie S 125i
SPECIFICATIONS
Name Movie S 125i Air cleaner type & No Paper element, wet
Model No. SR25BA
Fuel System
Fuel capacity 7.3 liters
Overall length 1920 mm
Throttle
Body
Overall width 700 mm
Overall height 1135 mm Throttle type Butterfly type
Wheel base 1284 mm
Engine type O.H.C.
Ignition System
Type ECU
Electrical Equip.
Displacement 124.8cc
Fuel Used 92# nonleaded gasoline
Front wheel 41 Spark plug NGK CR7HSA
Net weight (kg) Rear wheel 67
Total 108 Spark plug gap 0.60.7mm
Front wheel 45 Battery Capacity 12V8AH
Gross weight(kg) Rear wheel 73 Clutch Type Dry multi-disc clutch
Total 118 Power Drive System
sion Gear
Transmis-
Type Non-stage transmission
Tires Front wheel 110/70-12
Operation Automatic centrifugal
Rear wheel 130/70-12 type
Ground clearance 110 mm
Gear
Reduction
Type Two-stage reduction
Perform- Braking distance (m) 7.9m(40km/hr)
ance Min. turning radius 1860 mm Reduction 1st 0.86~2.64
Starting motor & ratio 2nd 7.8
Starting system kick starter
Front Caster angle 26.5°
Type
Moving Device
OHC air cooled 4-cycle Axle Trail length 80 mm
Cylinder arrangement Single cylinder 2V
Combustion chamber type Semi-sphere Tire pressure Front 1.75
(kg/cm) Rear 2.25
Valve arrangement O.H.C.
Bore x stroke (mm) 54×54.5 Turning Left 45°
Compression ratio 11 angle Right 45°
Compression pressure Front Disk brake
(kg/cm-rpm) 15-570 rpm Brake system
type Rear Drum brake
Max. output (ps/rpm) 11.8/8500
Engine
Device
Damping
Max. torque (kg m/rpm) 1.04/6500 Front Telescope
Intake Open 8° BTDC Suspension
Port (1mm) Close 29° BTDC type Rear Single Swing
timing Exhaust Open 32° BTDC
Frame type Under bone
(1mm) Close 4° BTDC
Valve Intake 0.12
clearance
Exhaust 0.12
(cold)
Idle speed (rpm) 1800 rpm
Lubrication type Forced pressure &
System
Lubrication
wet sump
Oil pump type Inner/outer rotor type
Oil filter type Full-flow filtration
Oil capacity 0.9 liter
Exchanging capacity 0.8 liter
Cooling Type Forced air cooling
1-1