Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
5. FUEL INJECTION SYSTEM
MOVIE S 150i
CELP FAILURE CODES LIST
Failure
Blinks Codes Problem Troubleshooting Engine condition
(speedo (diagnostic
meter) tool)
Reset TPI and confirm if the idle
position back to within the preset range. Engine running
06 P0120 Faulty TPS Confirm if TPS voltage is within at normal
0.3~4.5 V.
Confirm if the connector of TPS is
loosen.
Change a new TPS.
Confirm if MAP voltage is within
1~4.2 V. Engine running
09 P0105 Faulty MAP Confirm if the connector of MAP at normal
loosen.
Change a new TPS.
Confirm if WTS range is near 40°C:
Faulty WTS 1.136 Engine running
12 P0115 (water Confirm if the connector of WTS is at normal
temperature loosen.
sensor) Change a new WTS
Confirm if Tilt switch voltage range is
below,
- incline angle < 65°: 0.4~1.4 V
Faulty Tilt Engine running
15 P1630 - incline angle > 65°: 3.7~4.4 V
switch (Roll) at normal
Confirm if the connector of tilt switch
is loosen.
Change a new tilt switch
Confirm if O2 sensor voltage range is
below,
- A/F below 14.7: > 0.7V
Faulty O2 Engine running
17 P0130 - A/F over 14.7: < 0.18 V
sensor's at normal
Confirm if the connector of O2 sensor
voltage is loosen.
Change a new O2 sensor
Confirm if Fuel injector range is
Faulty within 11.3 10% Engine fail to
33 P0201 injector Confirm if the connector of injector is be started
(Nozzle) loosen
Change a new injector
5-8