Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
13. BRAKE SYSTEM MXU 250R/300R
REAR BRAKE MASTER
CYLINDER (REAR BRAKE
PEDAL)
REAR MASTER CYLINDER ON THE
LEFT HANDGRIP DISASSEMBLY
Refer to the "FRONT BRAKE MASTER
CYLINDER DISASSEMBLY" section in
the chapter 13.
ASSEMBLY
Refer to the "FRONT BRAKE MASTER
CYLINDER ASSEMBLY" section in the
chapter 13.
REAR MASTER CYLINDER ON THE Upper Nut
REAR BRAKE PEDAL DISASSEMBLY
Remove the brake reservoir cover.
Drain the brake fluid from the hydraulic
brake system. (page 13-13)
Loosen the upper and lower nuts.
Hold the lower nut to turn clockwise and
tighten upper nut.
Turn the lower nut counterclockwise
disconnect the rear brake pedal.
Lower Nut
Fluid Inlet Tube Fluid Outlet Tube Bolt
Disconnect the fluid inlet tube and remove
the fluid bolt to disconnect the fluid outlet
tube.
Remove the two bolts and remove the
master cylinder.
Bolts Fluid Outlet Tube
13-16