people 250 s Workshop-manual : Page 175

          13. FUEL SYSTEM/CARBURETOR/
    FUEL PUMP/ FUEL TANK                                                 PEOPLE/PEOPLE S 250



 FLOAT LEVEL INSPECTION
 Measure the float level at the location of the
 main jet (just contacting the float valve).
 Float Level: 18.51.0mm
              : 181.0mm(PEOPLE S 250)
 Replace the float if the level is incorrect.
 Check the operation of the float and then
 reinstall the float chamber.




                                                                Float



                                                                Vacuum Piston
 VACUUM CHAMBER ASSEMBLY
 First install the jet needle and spring into the
 vacuum chamber and then install the needle
 holder.




                                                    Needle Holder       Jet Needle


                                                                        Vacuum Piston
 Install the vacuum piston into the carburetor
 body.
 Install the spring.
 Install the vacuum chamber cover and tighten
 it with the two screws.

 · Be careful not to let the diaphragm slip.
    · If the diaphragm cannot be positioned
      correctly because of expansion, dry the
      diaphragm before installation.



                                                       Spring                Diaphragm


                                                                                        13-16