1. GENERAL INFORMATION
SPECIFICATIONS
Name & Model No. SH10BA
Overall length 1950mm Air cleaner type & No Paper element, wet
Fuel System
Overall width 735mm Lubrication oil capacity 1.5. liters
Overall height 1180mm Fuel capacity 10. liters
Wheel base 1350mm
Carburetor
Type PB
Engine type Air cooled 2-stroke Piston dia.
Displacement 49.4cc Venturi dia. 14 equivalent
Fuel Used 92# nonleaded gasoline Throttle type
Front wheel 45 Type CDI
Electrical Equipment
Net weight (kg) Rear wheel 61.5
Ignition System
Ignition timing 13.5°/2000rpm
Total 106.5 Contact breaker
Front wheel 80
Gross weight(kg) Rear wheel 149 Spark plug NGK
Total 229 BR8HSA
Tires Front wheel 110/70-12
Rear wheel 130/70-12 Spark plug gap 0.60.7mm
Ground clearance 155mm Battery Capacity 12V4AH
Perform- Braking distance (m) 4.4m /30km/HV Clutch Type Dry multi-disc clutch
Power Drive System
sion Gear Gear
Transmis- Reduction
ance Min. turning radius 2150mm Type Non-stage transmission
Starting motor & Automatic centrifugal
Starting system kick starter Operation
type
Type Gasoline, 2-stroke
Cylinder arrangement Single cylinder, flat Type Two-stage reduction
Combustion chamber type Semi-sphere Reduction 1st
Bore x stroke (mm) 39 x 41.4 ratio 2nd
Compression ratio 7.2:1 Front Caster angle
Moving Device
Compression pressure Axle Connecting rod
(kg/cm-rpm) 11.8
Max. output (ps/rpm) 5.2/7000 Tire pressure Front 1.75
Engine
Max. torque (kg m/rpm) 0.56/6500 (kg/cm) Rear 2.25
Intake Open Automatic controlled Turning Left 42.5°
Port (1mm) Close Automatic controlled angle Right 42.5°
timing Exhaust Open Front Disk brake
Brake system
(1mm) Close type Rear Expanding
Valve Intake Suspension Front Telescope
Device
Damping
clearance (cold) Exhaust type Rear Unit swing
Idle speed (rpm) 2000100rpm Shock absorber Front Telescope
Lubrication type Separate type type
System
Lubrication
Rear Double swing
Oil pump type Plunger type
Frame type Under bone
Oil filter type Full-flow filtration
Oil capacity 1.1 liters
Cooling Type Air cooling
1-1