13. REAR WHEEL/REAR BRAKE/ REAR SUSPENSION AGILITY 125 Brake Arm Bolt Wear Indicator Plate Apply a small amount of engine oil to the felt seal and install it to the brake cam. Install the wear indicator plate and brake arm. Align the wide groove on the wear indicator plate with the wide tooth of the brake cam. Install and tighten the brake arm bolt. Align the scribed line on the brake arm with the punch mark on the brake cam. Brake Arm Punch Mark Brake Cam Brake Cable Brake Arm Install the brake arm return spring. Install the brake arm pin. Connect the brake cable and install the adjusting nut. Install the rear wheel. ( 13-2) Adjust the rear brake lever free play. ( 3-8) Brake Arm Pin Adjusting Nut Upper Mount Bolt REAR SHOCK ABSORBER REMOVAL Remove the frame body cover. ( 2-3) Remove the air cleaner case. ( 5-19) Remove the rear shock absorber upper and lower mount bolts. Remove the rear shock absorber. Rear Shock Absorber Lower Mount Bolt Rear Shock Absorber Compressor DISASSEMBLY Install the rear shock absorber compressor as the figure shown. Install the rear shock absorber lower joint into the rear shock absorber compressor. Compress the rear shock absorber spring. Special Cushion Assemble & Disassemble Tool Cushion Assemble & Disassemble Too 13-4