agility 50 3 Workshop-manual : Page 143

          12. FRONT WHEEL/FRONT BRAKE/
     FRONT SUSPENSION                                                         AGILITY 50
                                                   Driver Handle A
 Drive new top and bottom ball races into the
 steering head using the outer driver.
 Be sure to completely drive in the ball
    races.




                                                            Outer Driver, 37x40mm

 INSTALLATION
 Apply grease to the top and bottom ball races
 and install 26 steel balls on the top ball race
 and 29 steel balls on the bottom ball race.
 Apply grease to the ball races and install the
 front fork.




                                                                                    Steel Balls
 Apply grease to the top cone race and install     Top Cone Race
 it.
 Tighten the top cone race and then turn the
 steering stem right and left several times to
 make steel balls contact each other closely.
 Check that the steering stem rotates
    freely without vertical play.




 Install the steering stem lock nut and tighten                      Long Socket Wrench
 it while holding the top cone race.
 Torque: 6.08.0kgf-m
 Install the front wheel. ( 12-7)
 Install the steering handlebar. ( 12-3)
 Install the speedometer cable. ( 12-7)

  Special
 Long Socket Wrench,32mm 8Angle


                                                           Lock Nut Wrench
                                                                                          12-22