agility city 125 Workshop-manual : Page 142

          12. FRONT WHEEL/FRONT BRAKE/
       FRONT SUSPENSION                                               AGILITY CITY 125
                                                    Driver Handle A

Drive new top and bottom ball races into the
steering head using the outer driver.
  Be sure to completely drive in the ball
      races.




                                                                        Outer Driver, 37x40mm



  INSTALLATION
  Apply grease to the top and bottom ball races
  and install 26 steel balls on the top ball race
  and 29 steel balls on the bottom ball race.
  Apply grease to the ball races and install the
  front fork.




                                                                                    Steel Balls
                                                    Top Cone Race

  Apply grease to the top cone race and install
  it.
  Tighten the top cone race and then turn the
  steering stem right and left several times to
  make steel balls contact each other closely.
  Check that the steering stem rotates
      freely without vertical play.



                                                                      Long Socket Wrench

  Install the steering stem lock nut and tighten
  it while holding the top cone race.
  Torque: 6.08.0kgf-m
  Install the front wheel. ( 12-7)
  Install the steering handlebar. ( 12-3)
  Install the speedometer cable. ( 12-7)

    Special
  Long Socket Wrench,32mm×8Angle


                                                                                           12-20