4. LUBRICATION SYSTEM AGILITY CITY 125 Lower Level ENGINE OIL/OIL FILTER OIL LEVEL · Place the motorcycle upright on level ground for engine oil level check. · Run the engine for 23 minutes and check the oil level after the engine is stopped for 23 minutes. Remove the oil dipstick and check the oil level with the oil dipstick. If the level is near the lower level, fill to the upper level with the specified engine oil. Oil Dipstick Upper Level OIL CHANGE The engine oil will drain more easily while the engine is warm. Remove the oil filter screen cap located on the bottom of the engine to drain the engine oil thoroughly. After the oil has been completely drained, Oil Filter Screen Cap check the filter screen O-ring for damage and replace if necessary. Install the oil filter screen, spring and filter screen cap. Torque: 1.5kg-m Fill with the specified SAE15W40#, API: SG engine oil to the proper level. Oil Capacity: At disassembly : 0.90 liter At change : 0.80 liter Check for oil leaks and then start the engine and let it idle for few minutes. Recheck the oil level. O-ring Bolts Pulser Coil OIL PUMP REMOVAL Remove the A.C. generator flywheel. Remove the nine right crankcase cover bolts and the right crankcase cover. Stator Right Crankcase Cover 4-2