Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
1. GENERAL INFORMATION DINK50/125
SPECIFICATIONS (DINK 125)
Overall length 2030 mm (81.2 in) Air cleaner type Paper element, wet
Overall width 760 mm (30.4 in) 11 L (2.31 lmp gal,
Fuel capacity
Fuel System
Overall height 1255 mm (50.2 in) 2.86 US gal)
Wheel base 1390 mm (55.6 in) Type LEA5
Carburetor
Water cooled 4-stroke, Piston dia. 21.8 mm (0.872 in)
Engine type
OHC engine Venturi dia. 24 mm (0.96 in)
Displacement 124.6 cc (7.6 cu-in) Throttle type Butterfly type
Fuel Used 92# nonleaded Type CDI
Electrical Equipment
Ignition System
gasoline Ignition timing 10°1.5°/1000 rpm
Front wheel 53 kg (116.6 lb)
Dry weight Rear wheel 85 kg (187 lb) NGK
Spark plug
Total 138 (303.6 lb) DPR7EA-9
Front wheel 60 kg (132 lb)
Curb weight Rear wheel 92 kg (202.4 lb) Spark plug gap 0.9 mm (0.036 in)
Total 152 kg (334.4 lb) Battery Capacity 12V8AH
Front wheel 120/70-13 Clutch type Dry multi-disc clutch
Transmission
Tire
Rear wheel 140/70-12 Type Non-stage transmission
Power Drive System
Gear
Ground clearance 140 mm (308 in)
Min. turning radius 2350 mm (94 in) Automatic centrifugal
Operation Type
Starting motor/Kick
Starting system
starter Type Two-stage reduction
Gear
Reduction
Type Gasoline, 4-stroke
1st 2.8~1
Cylinder arrangement Single cylinder Reduction
Combustion chamber type Semi-sphere ratio Final 8.82
Valve arrangement O.H.C.
1.75 kgf/cm2 (175 kPa,
Bore x stroke 52.4×57.8 mm Front
Moving Device
(2.096×2.312 in) Tire pressure 24.85 psi)
Compression ratio 10:1 2 kgf/cm2 (200 kPa,
Rear
15 kgf/cm2 (1500 28.4 psi)
Compression pressure
kPa, 213 psi) Turning Left 42.5°
Open 12° (BTDC) angle Right 42.5°
Intake
Close 35° (ABDC)
ENGINE
Brake system Front Disk brake
Open 28° (BBDC)
Exhaust type Rear Disk brake
Close 0° (ATDC)
Valve Intake 0.1 mm (0.004 in) Suspension Front Telescope
Damping
Device
type Rear Double swing
clearance
Exhaust 0.1 mm (0.004 in)
(cold) Shock absorber Front Telescope
Idle speed (rpm) 1700150rpm type Rear Double swing
Forced pressure & Frame type Under bone
Lubrication type
Lubrication System
Wet sump
Oil pump type Inner/outer rotor type
Oil filter type Full-flow filtration
1.1 L (0.968 lmp qt,
Oil capacity
1.166 US qt))
Oil exchanging 0.9 L (0.792 lmp qt,
capacity 0.954 US qt)
Cooling Type Liquid cooled
1-3