10. A.C. GENERATOR/STARTER CLUTCH GRAND DINK 250 Remove the starter one-way clutch rollers, plungers and springs. Shaft Starter Idle Gear INSTALLATION Install the starter driven gear onto the crankshaft. Install the starter idle gear and shaft. Starter Driven Gear Key Flywheel FLYWHEEL INSTALLATION Install the flywheel onto the crankshaft by aligning the key on the crankshaft with the groove in the flywheel. · Before installation, check and make sure that the inside of the flywheel is not contaminated. Hold the flywheel with the flywheel holder and tighten the flywheel nut. Torque: 53.963.7N-m Groove Flywheel Holder 10-5